您好,歡迎訪問東莞市保沃電子有限公司官網,我們將竭誠為您服務!

24小時服務熱線:

0769-87282516

熱門關鍵詞: 電容生產、 電容批發、
news center新聞資訊
contact us聯系我們

東莞市保沃電子有限公司

電  話:0769-87282516

聯系人:15920252128(陳先生

銷售部QQ:870010308 / 2482751716 / 2012618174

傳  真:0769-83513559

E-mail:dgbaowo@163.com

地  址:廣東省東莞市塘廈鎮塘廈工業路10號1棟

當前位置:首頁 > 新聞資訊 > 常見問題

電感的運用場合及說明

來源:發布時間:2020-11-18 16:46:59點擊率:

RSS訂閱

First, the occasion of the application of inductor.

Attention should be paid to moist and drying, concave and convex ambient temperature, high-frequency or low-frequency environment, rational inductance or impedance characteristics, etc.
Second, the frequency characteristics of inductors.
At low frequency, the inductor usually has the characteristics of inductance, which only plays the role of energy storage and high frequency filtering.
But at high frequency, its impedance characteristic is very obvious. There is a phenomenon of energy consumption and heat, and the rational effect is reduced by one level. The high frequency characteristics of different inductors are different.
The inductance of ferrite material is explained below:
The ferrite material is Fe-mg alloy or Fe-Ni alloy, which has high magnetic conductivity, so the capacitance between the inductor coils and windings is the smallest under the condition of high frequency and high resistance. Ferrite materials are usually used at high frequency, because they are mainly inductive at low frequency, making the on-line loss very small. In the case of high frequency, they mainly show the reactance characteristic ratio and change with the frequency. In practical application, ferrite materials are used as high frequency attenuators in RF circuits. In practice, ferrite is better equivalent to the parallel connection of resistance and inductor. the resistance is short-circuited by inductor at low frequency and the inductance impedance becomes so high at high frequency that the current passes through the resistance. Ferrite is a consuming device on which high-frequency energy is converted into thermal energy, which is determined by its resistance characteristics.


一、電感運用的場合
    濕潤與枯燥、環境溫度的凹凸、高頻或低頻環境、要讓電感體現的是理性,仍是阻抗特性等,都要留意。
二、電感的頻率特性
    在低頻時,電感通常出現電感特性,只起蓄能,濾高頻的特性。
    但在高頻時,它的阻抗特性體現的很明顯。有耗能發熱,理性效應降低一級現象。不相同的電感的高頻特性都不相同。
    下面就鐵氧體料的電感加以說明:
    鐵氧體料是鐵鎂合金或鐵鎳合金,這種料具有很高的導磁率,所以電感的線圈繞組之間在高頻高阻的狀況下發生的電容小。鐵氧體料通常在高頻狀況下運用,因為在低頻時他們首要電感特性,使得線上的損耗很小。在高頻狀況下,他們首要呈電抗特性比而且隨頻率改變。實踐運用中,鐵氧體料是作為射頻電路的高頻衰減器運用的。實踐上,鐵氧體較好的等效于電阻以及電感的并聯,低頻下電阻被電感短路,高頻下電感阻抗變得相當高,以至于電流悉數經過電阻。鐵氧體是一個消耗設備,高頻能量在上面轉化為熱能,這是由它的電阻特性決議的。

保沃電子

手機網站

東莞市保沃電子有限公司  版權所有© Copyright 2018 粵ICP備18102462號

地址:廣東省東莞市塘廈鎮塘廈工業路10號1棟

電   話:0769-87282516

聯系人:15920252128(陳先生

傳    真:0769-83513559

銷售部QQ:870010308 / 2482751716 / 2012618174

E-mail:dgbaowo@163.com

?
  • 在線客服
  • 在線客服
  • 在線客服
  • 在線客服
在線客服
国产国产一级aa大片 1024视频在线观看 yy6080私人影院理论 3d欧美黄动漫网站 白带有黄色